Diamond Blade For Cutting Zirconia

Diamond Cut Off Wheel For Zirconia

Wider Grinding Range
No Carbonization
No Burns On Workpieces
Sharp Grinding

Product

Diamond blade for cutting Zirconia has high sharpness and wear resistance. Resin bond and metal bond cut off wheels are both used for cutting zirconia. If high cutting accuracy is required, the diamond dicing blade is also used for cutting.

Zirconia

Zirconia ceramic is a high-performance ceramic material with unique physical and chemical properties such as high hardness, high melting point, high wear resistance, good corrosion resistance, and biocompatibility. Therefore, it is widely used in the manufacture of high-precision guides, bearings, cutting tools, etc.

Zirconia ceramics have a high hardness that is usually 9.5 Mohs. This hardness value is higher than that of most metal and non-metal materials, second only to a few materials such as diamond, cubic boron nitride and silicon carbide. The high hardness and toughness of zironia ceramics makes it more difficult to cut and process.

Selection of Diamond Blade For Cutting Zirconia

In the actual cutting process, both metal and resin bond diamond cut off wheels are both used for zirconia. Metal bond diamond cut off wheel has excellent wear resistance when cutting zirconia. If it is promptly dressed with the dressing board, the sharpness can be maintained for a long time. Resin bond diamond cut off wheel has higher sharpness, finer cut, and higher surface finish. If the required roughness of cut is high, should choose resin bond diamond cut off wheels.

Diamond dicing blade is actually a kind of hubless diamond cutting disc., with higher sharpness and cutting accuracy. It is also divided into metal bond and resin bond. If small workpieces require high-precision cutting, should choose diamond dicing blades.

The customers need to provide the inner diameter, outer diameter, thickness, abrasive layer height, grain size, cutting speed, feed rate, and etc.